No reviews yet
Be the first to review this product
Every review is verified against a real order by Kudobuzz
Skip to product information
These perfectly formed oak tea light holders are made from the same lengths that I make my peg rails from.
I try to waste as little as possible in my workshop, so each and every off-cut is put aside to be made into something, rather than for firewood.
These tea light holders will comfortably house a standard 38mm (1.5 inch) diameter tea light and have been throughly tested for safety.
The squares are 95mm (3.7 inch) wide and are 20mm (.7 inch) thick, finished in a light, clear wax.
Tea lights included.
£12.95
These perfectly formed oak tea light holders are made from the same lengths that I make my peg rails from.
I try to waste as little as possible in my workshop, so each and every off-cut is put aside to be made into something, rather than for firewood.
These tea light holders will comfortably house a standard 38mm (1.5 inch) diameter tea light and have been throughly tested for safety.
The squares are 95mm (3.7 inch) wide and are 20mm (.7 inch) thick, finished in a light, clear wax.
Tea lights included.
SIZING
As a guide, I usually leave two inches at each end, then space the pegs at 4 inch intervals.
So a 3 peg rail would be 12 inches long, 4 pegs 16 inches, 5 pegs 20 inches (multiply the number of pegs by 4 to give you the total length)
The length of the pegs are 2.8 inches (75mm) from the front face of the board, but can be made longer or shorter by request.
LEAD TIMES
I aim to work to a 2-4 week lead time depending on the number of orders I have in the workshop, but please get in touch if you have a custom project you would like to discuss.